Biography
Hi everyone. I have been a ham since 2012.
I transmit mostly ssb, digi like Psk, Sstv, Rtty and the new era of FT4 and FT8.
The feeling of a new DXCC is pure happiness, but those moments are fewer and farther between nowadays.
My Antenna System
Antenna Type: 80m Band Full-Wave Skyloop
Wire: 85 meters of heavy-duty sota beam field gear wire
Height: Placed exceptionally high at 25+ meters (82+ feet) above ground
Geometry and Direction: Triangular layout. One support point in the South, the Balun/feedpoint is at the North corner, and the third point points directly toward Japan. This specific layout creates a main radiation pull aimed straight toward Oceania. Get the wire as high as possible, and it will work Homebrew Hybrid Balun (Choke and 4:1)
To ensure clean radiation and handle high power, I built a two-stage hybrid balun system:
1:1 Line Isolation Choke: 2x FT240-31 ferrite cores in series. First core wound with 5 turns of coax, second core with 10 turns.
4:1 Impedance Transformer: 2x FT240-43 ferrite cores, each wound with 14 turns of 3mm enameled copper wire, cross-connected for 4:1 transformation and soldered directly to the bottom of the choke.
The loop is up, fully operational, and performing beautifully!
Antenna Status and News
With the new Skyloop up and running, my old trusty Carolina Windom has officially been retired after 14 years. However, she won't be gone for long—stay tuned for the upcoming Carolina Windom V2.0 which will be deployed in the near future!
the V2.0 Carolina windim is up in the air 1:1 Line Isolation Choke: 2x FT240-31 ferrite cores in series. First core wound with 5 turns of coax, second core with 10 turns.
13.4m rg 213 between 1:1 and 4:1
4:1 Impedance Transformer: 2x FT240-43 ferrite cores, each wound with 14 turns of 3mm enameled copper wire, cross-connected for 4:1 transformation and soldered directly to the bottom of the choke.
I am a QRP Operator so, I know my signal can be down in the mud, but I like to only use max 5 watts from my trx Yaesu FT 817ND.
I have been exclusively QRP since sept 2012.
The feeling with Less power, more patience and all new contacts is the happiness when a QSL is confirmed.
So, if you hear me, congrats on having a good receiver in your Amateur Radio station.
Run a "killer watt" rather than a kilowatt!
JUST DO IT.
LONG LIVE QRP!
DX Code of Conduct
I will listen, and listen, and then listen again before calling.
I will only call if I can copy the DX station properly.
I will not trust the DX cluster and will be sure of the DX station's call sign before calling.
I will not interfere with the DX station nor anyone calling and will never tune up on the DX frequency or in the QSX slot.
I will wait for the DX station to end a contact before I call.
I will always send my full call sign.
I will call and then listen for a reasonable interval. I will not call continuously.
I will not transmit when the DX operator calls another call sign, not mine.
I will not transmit when the DX operator queries a call sign not like mine.
I will not transmit when the DX station requests geographic areas other than mine.
When the DX operator calls me, I will not repeat my call sign unless I think he has copied it incorrectly.
I will be thankful if and when I do make a contact.
I will respect my fellow hams and conduct myself so as to earn their respect.
wac, waz, 250 dxcc, cqww ssb 2026 first time run that contest and that works fine. i run 5w Qrp all band 1# Sweden 11# in EU 16# in the all world.
73de SA6BZZ / ANDREAS
Worked DXCCs:
Equipment
My old Yaesu ft817nd still strong in my pack and Qth.
antennas skyloop 85m in 25m ower ground carolina windom 25m over the ground
sirio gainmaster 10-12m
curscraft arx2b 2m antenne vertical.